45TPH-180TPH Ball Mill Grinding Machine To 200 Mesh Ball Mill Equipment

Ball mill Grinding to 200 mesh

1.Product Introduction

Ball mill grinding to 200 mesh refers to the process of reducing materials to a fineness of 200 mesh (approximately 74 microns) using a ball mill. This process is widely applied in industries such as mining, construction materials, and chemicals to pulverize ores, limestone, cement clinker, and other materials into fine powders that meet specific industrial requirements.

2.Application

1. Mining and Mineral Processing

• Application Context: In the processing of iron, copper, gold, and other ores, raw ore must be ground to 200 mesh to ensure the complete liberation of valuable minerals from the gangue (waste rock).
• Typical Process: In a two-stage grinding circuit, the second stage often requires a fineness where over 75% of the material passes through a -200 mesh screen. This optimization is crucial for increasing the recovery rate during the subsequent flotation stage.
• Equipment Matching: Industrial-scale ball mills are paired with spiral classifiers or hydrocyclones to form a closed-circuit system, ensuring consistent particle size control.
•  

2. Construction Materials Industry

• Cement Production: Clinker and admixtures (such as fly ash and slag) must be ground to 200 mesh or finer to meet the specific surface area requirements for cement strength development.
• Fly Ash Deep Processing: Using energy-efficient ball mills, fly ash is processed to a fineness of 200–400 mesh. This enhances its value as a concrete admixture or a raw material for high-grade construction products.
• Gypsum Treatment: Industrial by-products like phosphogypsum can be ground to 200 mesh. This processed material is then utilized in the production of gypsum boards or as a cement retarder.
•  

3. Metallurgy and Chemical Industry

• Metal Powder Preparation: Materials such as bauxite, after high-temperature calcination, must be further ground to 200 mesh for use in refractories or as raw material for aluminum smelting.
• Catalysts and Pigment Processing: High fineness enhances chemical reactivity and tinting strength. Ball mills provide uniform grinding while effectively preventing particle agglomeration.
•  

4. New Energy and Carbon Materials

• Petroleum Coke Grinding: When used for lithium-ion battery anodes or as carbon raisers, petroleum coke is typically ground to a 200 mesh (D95) standard. This can be achieved using either vertical roller mills or ball mills.
• Graphite Processing: 200-mesh graphite powder is widely utilized in carbon products, bearing lubricants, and as an additive in industrial paints and coatings.
•  

5. Laboratory and Scientific Research

• Sample Preparation: Geology and metallurgy labs frequently use miniature ball mills to grind ore samples to 200 mesh for chemical assays or physical property testing.
• Advantages of Wet Grinding: Wet grinding is often preferred for brittle and hard materials as it effectively suppresses dust, controls temperature rise, and produces a narrower, finer particle size distribution.

3.Working Principle

The primary functional component of a ball mill is a horizontally mounted rotating drum (shell), which is partially filled with grinding media (such as steel balls or ceramic balls) and the material to be processed.As the drum rotates, the grinding media are lifted to a specific height through the synergistic effects of centrifugal force, gravity, and frictional forces exerted by the internal liners. Once they reach a certain point, they fall freely or roll down, creating a cyclic pattern of impact and attrition (grinding):

• Impact Crushing: When the grinding media are carried to the highest point and dropped, they behave like projectiles, striking the material at the bottom of the drum. This high-energy impact provides the necessary force to fracture larger particles and coarse feed.

• Attrition and Refinement: As the drum continues to rotate, the grinding media slide and roll against one another and the liners. This creates intense friction and compression (shear forces), which "shaves" the particles down, further refining them into a fine powder. This is the primary stage for achieving high-fineness targets.

• Circulating/Continuous Grinding:Raw material is continuously fed into the inlet. Driven by the material level gradient, the forward thrust from falling media, and (in some systems) air currents, the material migrates slowly toward the discharge end. This ensures a continuous, steady-state grinding operation.

4.Advantages

 Wide Range of Material Adaptability

• Handling High-Moisture and Sticky Materials: Specifically designed for materials with high water content or those prone to agglomeration. By employing wet grinding, the system effectively prevents clogging and blockages that typically plague dry grinding circuits.

• High-Purity Material Processing: The equipment can be configured with ceramic liners(such as alumina or silica) and alumina grinding balls. This setup eliminates metallic contamination, making it ideal for the stringent purity requirements of electronic materials, fine chemicals, and advanced ceramics.

•  

 Stable and Adjustable Output Fineness

• Grinding Time: Extending the grinding duration directly increases the proportion of -200 mesh particles. However, this is usually balanced against energy consumption to find the optimal "sweet spot" for throughput versus fineness.

• Grinding Media Gradation: A scientifically calculated ball charge gradation (the ratio of large, medium, and small balls) is essential.

• Rotational Speed and Loading : Optimizing the critical speed percentage and the total media filling rate ensures a synergy between impact (cataracting) and attrition (cascading). This balance maximizes the effective grinding work done on the material while minimizing wear on the liners.

•  

 Mature Technology with Ease of Integration and Automation.

• Particle Size Classification and Return Control

• Automatic Discharge and Continuous Operation

• Dust Collection and Environmental Compliance 

5.Technical Specifications

6.Our Solutions